2014年思科认证考试Cisco路由技术:通过路由器联通外网

牛课网 考试宝典 更新时间:2024-05-19 20:20:07

思科路由技术试卷a卷答案 思科路由器实验 思科路由器接入外网配置

为了帮助大家更好的复习2014年思科考试科目,我们考吧(kao8.cc)主要为大家汇编了以下辅导资料,希望考生们能够喜欢。想了解更多相关思科考试信息,我们考吧网会第一时间为大家奉上。

实验一

实验名称:搭建一个连通外网的环境

实验过程

步骤1:配置基本环境

首先,打开Cisco Packet Tacer,购买三台主机,一台交换机,一台路由器,并用合适的线缆连接起来。单击主机选择Desktop-ipconfiguration,为三台主机分别配192.168.1.1;192.168.1.2;192.168.1.3的IP。

步骤2:配置交换机的IP与网关

单击交换机进入CLI命令行模式输入enable进入特权模式,输入configure terminal 进入全局配置模式;在全局配置模式下 interface vlan 1- ip address 192.168.1.253 255.255.255.0 -no shutdown;

Switch>enable

Switch#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#interface vlan 1

Switch(config-if)#ip address 192.168.1.253 255.255.255.0

Switch(config-if)#no shutdown

Switch(config-if)#

%LINK-5-CHANGED: Interface Vlan1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up

Switch(config-if)#

这样就配置好了交换机IP。为了验证我们可以主机1 ping一下交换机IP。

ping statistics for 192.168.1.253:

Packets: Sent = 4, Received = 3, Lost = 1 (25% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms

发现时可以ping通的。下面输入exit回到全局配置模式。在命令行输入ip default-gateway 192.168.1.100就可以为交换机配置网关,这样可以方便不同网段主机对交换机的管理。

步骤3:配置路由器接口IP

单击路由器进入CLI命令行模式,通交换机一样,enable进入用户模式,configure terminal 进入全局配置模式。输入interface fastethernet 0/0进入接口,输入ip address 192.168.1.254 255.255.255.0然后no shutdown。

Router>enable

Router#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#

Router(config)#interface fastethernet 0/0

Router(config-if)#ip address 192.168.1.254 255.255.255.0

Router(config-if)#no shutdown

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#

这样就配置好了路由器的IP了,用一个主机ping一下

PC>ping 192.168.1.254

Pinging 192.168.1.254 with 32 bytes of data:

Reply from 192.168.1.254: bytes=32 time=2ms TTL=255

Reply from 192.168.1.254: bytes=32 time=0ms TTL=255

Reply from 192.168.1.254: bytes=32 time=0ms TTL=255

Reply from 192.168.1.254: bytes=32 time=0ms TTL=255

Ping statistics for 192.168.1.254:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 2ms, Average = 0ms

PC>

可以Ping通,至此,实验完成。

实验结果:本次实验其实不难,主要的还是在于熟练,工作上以后,对于这样的操作,应该做到秒杀。

推荐阅读:

2014年思科认证:CCNA认证考试高分必备试题及答案汇总 

2014年思科认证:CCNA认证考试高分必备能力提升试题及答案汇总

2014年思科认证:CCNA认证考试精选模拟试题及答案汇总

考试宝典安装说明

宝典适用于手机、电脑、平板,您可安装客户端或在浏览器使用。

电脑版

手机版

网页版

考试宝典咨询
服务热线

TEL:029-88699698